Scrapbooking Ideas and Solutions - Paper Cutting Technique

Paper cutting is a traditional and easy scrapbookingTurn the paper over and fold over the two longer
idea and solution that you can use on your projects.edges from step 1, so they align with the fold made in
This technique involves folding the paper, and thenstep 2.
cutting it into a single design with the sections stillThe result should look like a double layer "M" shape.
attached at the folds. Once the paper is unfolded, itUsing the grid on your cutting mat and a ruler, draw a
reveals repeated motifs that will be joined together.zigzag along one side of the folded paper, spacing the
This is the technique we used to use as children whenpoints of the zigzag 6cm apart on each side.
we would cut out paper chains of people holdingDraw another zigzag parallel to the first and 1cm away
hands. Variations of this technique has been used tofrom it.
make many wonderful designs and backgrounds forCut out the zigzag and be careful not to cut through
scrapbooking projects.the folded edges of the paper. Cut into the inside of
In today's scrapbooking idea and solution, I am going toeach point from one direction, and then turn the paper
tell you how to make a trellis cut out, that you can useand cut into the point from the other direction. Make
to lay over an existing layout or contrastingsure to cut the inside points neatly.
background. You will need a pair of sharp, pointedOpen out the cut out paper along the central fold.
scissors, which will be used for cutting out all the finerUsing the smallest punch of a leather punch or you
details. You can also experiment by using scissors withpunch tool, punch half a hole through the fold at each
blades that are designed to cut decorative edges, thendiamond point. Unfold the paper along the side folds
your trellis could have scallops or even zigzag edging.and repeat the process until every point has a hole
Fold a sheet of paper in half lengthwise so that thepunched in it.
wrong sides of design are together. The paper cuttingUnfold the paper carefully to reveal the trellis. Set a
technique works best with thin paper.iron to warm and carefully press the paper flat.
Fold it in half again, aligning this fold with the two longYou can use this cut out trellis to add to loads of
edges.backgrounds or even to make a garden fence on
Fold over the folded edge so it aligns with the foldyour layout.
mad in Step 2.